Follow these steps to open the ports an on-premises installation needs. A system administrator who knows how to configure firewall ports should do this.
Each inbound rule goes on the machine that runs that service. Axero connects out to SQL Server, Elasticsearch, and the mail server.
The steps are the same for every port. Create one rule for each row of this table, with its port and rule name:
To use the command line instead, run the command for each port below.
Web Server: Ports 80 & 443
netsh advfirewall firewall add rule name="WebServerPort80" dir=in protocol=TCP localport=80 action=allow
netsh advfirewall firewall add rule name="WebServerPort443" dir=in protocol=TCP localport=443 action=allow
SQL Server: Port 1433
<web server IP address>
netsh advfirewall firewall add rule name="SQLServerPort1433" dir=in protocol=TCP localport=1433 remoteip=<web server IP address> action=allow
Elasticsearch: Port 9200
netsh advfirewall firewall add rule name="ElasticsearchPort9200" dir=in protocol=TCP localport=9200 remoteip=<web server IP address> action=allow
SMTP Server: Port 25 (only if you run your own mail server)
Open this port on your mail server, and only if you run that server yourself. Axero sends email by connecting out to the mail server, so the Axero server itself needs no inbound mail port.
netsh advfirewall firewall add rule name="SMTPServerPort25" dir=in protocol=TCP localport=25 action=allow
Your site checks its license with licensing.axerosolutions.com over port 443. This is an outbound connection, from your server to Axero, so it needs no inbound rule. Make sure your firewall allows outbound traffic to port 443 for this external service. Most firewalls allow outbound traffic on this port by default, but check your settings and adjust them if needed. If your firewall rule names the destination, allow the name licensing.axerosolutions.com rather than its IP address. Your site connects by name, and the address behind the name can change. To check the connection, run Test-NetConnection -ComputerName licensing.axerosolutions.com -Port 443 in PowerShell on the web server.
Test-NetConnection -ComputerName licensing.axerosolutions.com -Port 443
Test each port from the machine that connects to it. For SQL Server and Elasticsearch, that is the web server. Open PowerShell there and run, for example:
Test-NetConnection -ComputerName <SQL Server name or IP address> -Port 1433
The port is open when the result shows TcpTestSucceeded : True. Repeat with -Port 9200 and the Elasticsearch server's name. To check ports 80 and 443, open the site's address in a browser on another computer.
TcpTestSucceeded : True
-Port 9200
is requesting access to a wiki that you have locked: https://my.axerosolutions.com/spaces/5/axero-documentation/wiki/view/104883/how-to-open-required-ports
Your session has expired. You are being logged out.